How do you install a linear shower drain?

If you want to install a new shower drain, you must have the right materials and procedures in place.
Linear drains have become popular for most modern homeowners, as they are low-profile, flexible and
design-centric – making them ideal for remodeling projects. Before starting with the job, you must keep
yourself updated with the local plumbing codes and requirements. Check the product quality before you
fix it on the shower wall, apart from ensuring that the components and accessories are ready to be
installed. In case you’re looking for a replacement, return them to the store.

Once you have the right shower channel drain in India, ensure to install with proper maintenance and
care. This protects its finish and prevents it from damage, so have assorted screwdrivers, flooring
mortar, silicon sealant and safety glasses when installing the drain in place. You must choose the right
placement location, such as the edge of the wall, in the centre or along the doorway. It should be linear
to your rough in-piping system, after which you should cut out a three-and-a-half-inch cutout hole for
the drain. Alternatively, you can locate the right hole placement by adding a thick wall substrate, tile or
stone.

After placing the Jayna best linear shower drain, pre-fit it onto the plumbing waste to ensure its
stability. Once the pipe is set, remove the elongated conduit component. Establish the right water
barrier cleavage on the floor before you install the mortar bed, regardless of whether you have concrete
or wooden floors. When installing the metal latch on the bathroom floor, you must follow the local
building guidelines. Once done, apply painters, clear packing tape or masking tape onto the shower
drain flanges and body to stabilise the drain and keep it clean from mortar and debris.
To build the drain support, prepare a damp mortar bed and support base beneath the linear shower
drain trench. Finally, build the side flanges and back flanges next to the shower wall. Connect the linear
drain body onto the plumbing system’s waste line, where you use a no-hub couple and press the drain
down to the prepared mortar bed. Finally, level the shower drains and pack the mortar under the pipe
flange.

When installing linear shower drains, you must only slope the floor in a single direction. Traditional
centre drains require you to slope the flooring in all four directions, otherwise the water wouldn’t flow
easily. If you have a no-threshold or curb-less shower, you should place the linear drains along the

shower door wall or directly opposite that. Due to the slope requirements, place the drain perpendicular
to the door becomes a tripping hazard.

You’ll find linear drains in different lengths as per your bathroom layouts, such as placing the drain
across the entrance wall for curb-less options. You must remember that a too-narrow drain or one that
simply runs along the doorway causes the water to flood in the corners or beside the walls.

As for best bathroom shower floor drain in India, most linear drains remove eight to ten gallons of
water every minute.